Favourite this Job

Locksmith

Kaimahi Raka

Alternative titles for this job

Locksmiths install, maintain and replace locks, keys, safes, electronic locking devices and access control systems for buildings and vehicles. They may also install and repair security systems.

Pay

Locksmiths with one to three years' experience usually earn

$17-$25 per hour

Qualified locksmiths with more than three years’ experience usually earn

$25-$29 per hour

Source: Beveridge Locksmiths, 2018.

Job opportunities

Chances of getting a job as a locksmith are average due to stable numbers of people in the role.

Pay

Pay for locksmiths varies depending on experience, fees and location.

  • Apprentice locksmiths usually start on the training minimum wage or adult minimum wage, with pay increasing to $20 an hour as they gain skills and unit standards.
  • Locksmiths with one to three years' experience usually earn between $20 and $25 an hour.
  • Qualified locksmiths with more than three years' experience can earn between $25 and $29 an hour.

Locksmiths who run their own business may earn more than this, but their income depends on the success of the business.

Locksmiths may also receive a percentage of after-hours call-out fees. Locksmith pay rates in Auckland are generally higher than elsewhere.

Source: Beveridge Locksmiths, 2018.

(This information is a guide only. Find out more about the sources of our pay information)

What you will do

Locksmiths may do some or all of the following:

  • install and repair locks and safes
  • cut or make keys to fit locks and reset combination locks
  • open jammed locks and safes
  • advise clients on locks, safes and general security needs
  • develop and design master key systems (keys that only work in particular locks and can't be copied).

Licenced locksmiths working in security may also:

  • install and repair safes, alarm systems and electronic locks
  • develop and design electronic key systems and alarms
  • design and install electronic or access control systems (including swipe cards)
  • design, install and maintain alarm and CCTV systems.

Locksmiths working with vehicles may also:

  • unlock vehicles and make replacement metal keys
  • produce and programme electronic transponder keys (remotes).

Skills and knowledge

Locksmiths need to have knowledge of:

  • master keying, key making and key cutting
  • different lock types, safes and locking mechanisms
  • lock repair methods and locksmith workshop equipment
  • security alarm systems
  • electronic security systems.

Working conditions

Locksmiths:

  • work regular business hours, but may be on call and work at night or during weekends
  • often work from a mobile workshop in a van and travel within their region to do jobs
  • may work in workshops and travel to jobs at businesses, private homes and vehicles.

What's the job really like?

Dion Di Leva

Dion Di Leva

Locksmith

How did you get into locksmithing?

"I was always keen to work with my hands and I had a cousin who did locksmithing who mentioned it. I started doing work experience through the Gateway programme and when I finished school I started as a trainee, which developed into an apprenticeship.

Has this been a good choice for you?

"Having a trade is definitely a good idea. Getting trained and paid at the same time is pretty good. I’ve got no debt and am pretty well set up for the future."

What do you like most?

"Cracking safes is definitely the highlight – it’s a real rush!

"And I had to pick open a lock on a Porsche, it’s got a lot of technology to prevent you from doing it, and being able to bypass that was a lot of fun, very rewarding.

"I’m interested in the electronic side of automotives, so my work now involves programming chips in remotes and getting into the car’s computer and editing the files in binary code.

“I’m doing electronic keys and proximity keys – you don’t have to physically put a key in the ignition anymore. It’s all moving to access control stuff, when even your phone will open the door." 

Entry requirements

There are no specific requirements to become a locksmith. However, many employers prefer to employ people who have, or are working towards, a locksmith qualification. A driver's licence is also useful.

To become a qualified locksmith you usually need to complete a three-year apprenticeship and gain a New Zealand Certificate in Locksmithing (Trade) (Level 4). [This is replacing the National Certificate in Locksmithing (Level 4)]

Competenz, an industry training organisation, oversees locksmith apprenticeships.

If you have five or more years' experience working as a locksmith, you can become qualified by: 

  • applying to Competenz to have your experience assessed towards a qualification, or
  • sitting a practical and written test run by the Master Locksmith's Association of Australasia to become a master locksmith.

Locksmiths must not have any criminal convictions with a term of imprisonment attached. 

Secondary education

No specific secondary education is required for this job, but maths, English, digital technologies, and construction and mechanical technologies to at least NCEA Level 2 are useful. 

For Year 11 to 13 students, the Gateway programme in engineering is a good way to gain industry experience.

Additional requirements for specialist roles:

Locksmiths who work with safes, alarms or security systems need a licence or certificate of approval as a security technican or security consultant from the Ministry of Justice.

Personal requirements

Locksmiths need to be:

  • careful and accurate, with an eye for detail
  • thorough and efficient
  • honest and reliable
  • good at problem solving, and able to think laterally
  • able to work alone and unsupervised.

There aren't many female locksmiths but there is a place for them, especially with home security. It’s not super strenuous, it’s light, clean work and it’s very varied.

Photo: Alan Le Breton

Alan Le Breton

General Manager – Director Beveridge Locksmiths

Useful experience

Useful experience for locksmiths includes:

  • basic engineering and mechanical workshop skills
  • metalwork, woodwork and carpentry
  • work for a key-cutting business
  • work with electronic equipment
  • problem-solving work done using your hands, such as model-making
  • customer service experience.

Physical requirements

Locksmiths need to have good eyesight (with or without corrective lenses).

Find out more about training

Competenz
0800 526 1800 - info@competenz.org.nz - www.competenz.org.nz
Check out related courses

What are the chances of getting a job?

Demand for locksmiths steady

There is a steady demand for locksmiths doing traditional work, such as helping people who are locked out of houses or vehicles and creating and fitting metal keys and locks.

There is also some demand for locksmiths to install electronic key systems, and remote control systems that integrate CCTV, alarms and door locks.

Locksmith is a small occupation with fewer than 400 workers.

How to get a locksmith job 

Your chances of securing a job are best if you approach a large locksmith company in person as they don't always have suitable applicants for vacancies.

If you are interested in training to work with safes, alarms or security systems this may help you to get a job.

Most locksmiths work for private businesses

Most locksmiths work for small businesses employing up to eight staff members, or for large national companies employing many locksmiths. Some locksmiths are employed by government in prisons.

Sources

  • Le Breton, A, general manager – director, Beveridge Locksmiths Limited, careers.govt.nz interview, June 2018.
  • Ministry of Business, Innovation and Employment, '2006-2014 Occupation Data' (prepared for Careers New Zealand), 2015.

(This information is a guide only. Find out more about the sources of our job opportunities information)

Progression and specialisations

Locksmiths may progress to set up their own locksmith business, or move into management roles

Locksmiths can specialise in roles such as:

Automotive Locksmith
Automotive locksmiths work with vehicle security systems, computers and keys, including transponder and proximity keys.
Security Consultant
Security consultants advise people on security requirements, and recommend and design security systems.
Dion Di Leva sits soldiering at a workbench in a mobile locksmith workshop van

Locksmiths install and repair locks for buildings and vehicles

Last updated 15 July 2019